|Chuck Body Material||Cast Iron|
|Jaws Material||40CR Steel|
|Bevel Gear Material||40CR Steel|
|Pinions Material||20CR Steel|
|Item Diameter||4.92" / 125 mm|
|Bolt Circle Diameter||4.25" / 108 mm|
|Center Hole Diameter||1.18" / 30 mm|
|Internal Jaw Clamping Range (A-A1)||0.098"-1.57" / 2.5-40 mm|
|Internal Jaw Jamming Range (B-B1)||1.5"-4.92" / 38-125 mm|
|External Jaw Clamping Range (C-C1)||1.5"-4.33" / 38-110 mm|
|Chuck Body Thickness||2.28" / 58 mm|
|Item Weight||11.2 lbs / 5.08 kg|
|Package Dimensions||6.3" x 6.3" x 5.9" / 16 x 16 x 15 cm|
Exceptional quality for the price.
Lathe Chuck K11-125
Run out more than stated ; chuck jaws could have been finished better; comparing tests with my original chuck, which is Belco, virtually half run out compared to your chuck. We will not be returning unless you can supply replacement jaws, but felt you needed this feedback
100mm Lathe Chuck
Good quality chuck, well packed and all accessories well oiled with the exception of the key of course, very quick dispatch and delivery! Thankyou Vevor.
10" 3 jaw chuck fo under £100
Made a back plate to adapt it to my 1959 Edgewick MK1 lathe. Once in place had about 0.0015 run out, mostly from the lathe it's self. The jaws were not perfectly alined but easy fix ran boring bar through centre with carbide insert. Have two videos on my YouTube channel part one https://www.youtube.com/watch?v=k2UsO-YbpuM&ab_channel=MarshallSmart. Part two https://www.youtube.com/watch?v=zimH9Y6HHEc The jaws can be put in any slot as long as you pay attention to where the teeth catch. Only other thing I would say is that I have been having to take the jaws out after each use to clean out chips. Jaws stick if I don't do that. Value for money you could not beet it. Might buy one of the smaller one's to fit in to tail stalk with morse taper 3 and back plate to suit.
Customer Service Reply：
Thanks for your message and sorry about the inconvenience caused.
We are glad to offer you the best service here.
Would you kindly send e-mail to email@example.com with your order number and the related photo or video to show the issue clearly please?
We will help you check it and reply you within 24 hours.
Please do not worry. We will offer satisfying solution after we figure it out.
Your any feedback will be highly appreciated.
Almost speechless, how do they do it for the price? This is better than the chuck costing four times as much I have. Grab one while you can at this price